Auteur Sujet: Le coin des barbus, Questions, réponses et blabla (Lu 1338545 fois)

après un coup de aptitude install cpufrequtils j'ai gratté quelques watts de consommation, ça descend à 78w au calme, pas si mal finalement quand on compare à des nas 4 baies :

guez · « **Réponse #14241 le:** 25/02/13 22:19 »

je serais bien tenté de voir ce que ça donnerait avec un autre cpu s775 plus light en 45 nm

Bitman · « **Réponse #14242 le:** 25/02/13 22:19 »

tu geres ca comment cpufreq ? faudrait que je regarde aussi

guez · « **Réponse #14243 le:** 25/02/13 22:21 »

j'ai installé et c'est tout, les 4 cores sont passés de 2400 à 1600 mhz quand c'est au repos

Code: [Sélectionner]

root@arii:~# cat /proc/cpuinfo | grep MHz
cpu MHz         : 1596.000
cpu MHz         : 1596.000
cpu MHz         : 1596.000
cpu MHz         : 1596.000

guez · « **Réponse #14244 le:** 25/02/13 22:22 »

Code: [Sélectionner]


root@arii:~# cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 0
  maximum transition latency: 10.0 us.
  hardware limits: 1.60 GHz - 2.39 GHz
  available frequency steps: 2.39 GHz, 1.60 GHz
  available cpufreq governors: powersave, conservative, ondemand, userspace, performance
  current policy: frequency should be within 1.60 GHz and 2.39 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.60 GHz (asserted by call to hardware).
  cpufreq stats: 2.39 GHz:0.71%, 1.60 GHz:99.29%  (147127)
analyzing CPU 1:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 1
  maximum transition latency: 10.0 us.
  hardware limits: 1.60 GHz - 2.39 GHz
  available frequency steps: 2.39 GHz, 1.60 GHz
  available cpufreq governors: powersave, conservative, ondemand, userspace, performance
  current policy: frequency should be within 1.60 GHz and 2.39 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.60 GHz (asserted by call to hardware).
  cpufreq stats: 2.39 GHz:1.13%, 1.60 GHz:98.87%  (67715)
analyzing CPU 2:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 2
  maximum transition latency: 10.0 us.
  hardware limits: 1.60 GHz - 2.39 GHz
  available frequency steps: 2.39 GHz, 1.60 GHz
  available cpufreq governors: powersave, conservative, ondemand, userspace, performance
  current policy: frequency should be within 1.60 GHz and 2.39 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.60 GHz (asserted by call to hardware).
  cpufreq stats: 2.39 GHz:1.12%, 1.60 GHz:98.88%  (138739)
analyzing CPU 3:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 3
  maximum transition latency: 10.0 us.
  hardware limits: 1.60 GHz - 2.39 GHz
  available frequency steps: 2.39 GHz, 1.60 GHz
  available cpufreq governors: powersave, conservative, ondemand, userspace, performance
  current policy: frequency should be within 1.60 GHz and 2.39 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 1.60 GHz (asserted by call to hardware).
  cpufreq stats: 2.39 GHz:0.95%, 1.60 GHz:99.05%  (60531)

guez · « **Réponse #14245 le:** 25/02/13 22:22 »

après on peut forcer les réglages, je préfère en auto pour mon utilisation

Bitman · « **Réponse #14246 le:** 25/02/13 22:29 »

Citer

root@bitmachine:~# cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 2.00 GHz - 3.00 GHz
available frequency steps: 3.00 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 3.00 GHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 3.00 GHz (asserted by call to hardware).
cpufreq stats: 3.00 GHz:100.00%, 2.67 GHz:0.00%, 2.34 GHz:0.00%, 2.00 GHz:0.00% (22)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 2.00 GHz - 3.00 GHz
available frequency steps: 3.00 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 2.00 GHz and 3.00 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 3.00 GHz (asserted by call to hardware).
cpufreq stats: 3.00 GHz:0.42%, 2.67 GHz:0.04%, 2.34 GHz:0.06%, 2.00 GHz:99.48% (570)

guez · « **Réponse #14247 le:** 25/02/13 22:41 »

bah il tourne à fond là oui

Bitman · « **Réponse #14248 le:** 25/02/13 22:42 »

j'ai tenté les cpufreq-set -g conservative ondemand etc ca change rien

guez · « **Réponse #14249 le:** 25/02/13 22:43 »

t'as bien le speedstep d'activé dans le bios ?