pastigo@pastigo-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 008 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 0e41:4750 Line6, Inc. GuitarPort
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
pastigo@pastigo-desktop:~$
[ 0.399160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.399246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.399332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.412927] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.413031] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.413133] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.413234] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.413335] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.413436] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.413537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.413638] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.413737] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B7, should be AE [20080926]
[ 0.413779] ACPI: WMI: Mapper loaded
[ 0.413804] SCSI subsystem initialized
[ 0.413804] libata version 3.00 loaded.
[ 0.413804] usbcore: registered new interface driver usbfs
[ 0.413804] usbcore: registered new interface driver hub
[ 0.413804] usbcore: registered new device driver usb
[ 0.413804] PCI: Using ACPI for IRQ routing
[ 0.420008] Bluetooth: Core ver 2.13
[ 0.420022] NET: Registered protocol family 31
[ 0.420022] Bluetooth: HCI device and connection manager initialized
[ 0.420022] Bluetooth: HCI socket layer initialized
[ 0.420022] NET: Registered protocol family 8
[ 0.420022] NET: Registered protocol family 20
[ 0.420030] NetLabel: Initializing
[ 0.420032] NetLabel: domain hash size = 128
[ 0.420033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.420045] NetLabel: unlabeled traffic allowed by default
[ 0.420057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.420061] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.424049] AppArmor: AppArmor Filesystem Enabled
[ 0.432008] pnp: PnP ACPI init
[ 0.432015] ACPI: bus type pnp registered
[ 0.434822] pnp: PnP ACPI: found 15 devices
[ 0.434823] ACPI: ACPI bus type pnp unregistered
[ 0.434826] PnPBIOS: Disabled by ACPI PNP
[ 0.434833] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.434838] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.434843] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.434845] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.434846] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.434848] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.434851] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.434853] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.434854] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
[ 0.434856] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.434858] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
[ 0.434860] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.434865] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.434867] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.434871] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.434875] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.434877] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.434879] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.434881] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.469514] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.469516] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.469519] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
[ 0.469522] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.469525] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.469526] pci 0000:00:1c.0: IO window: disabled
[ 0.469530] pci 0000:00:1c.0: MEM window: disabled
[ 0.469533] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[ 0.469538] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.469540] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.469544] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.469547] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.469551] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.469553] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.469557] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.469560] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.469564] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.469567] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.469570] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.469573] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.469582] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.469585] pci 0000:00:01.0: setting latency timer to 64
[ 0.469591] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.469594] pci 0000:00:1c.0: setting latency timer to 64
[ 0.469599] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.469602] pci 0000:00:1c.4: setting latency timer to 64
[ 0.469607] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.469610] pci 0000:00:1c.5: setting latency timer to 64
[ 0.469615] pci 0000:00:1e.0: setting latency timer to 64
[ 0.469618] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.469619] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.469621] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.469622] bus: 01 index 1 mmio: [0xfa000000-0xfe8fffff]
[ 0.469624] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.469625] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.469627] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.469628] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.469629] bus: 04 index 2 mmio: [0xf8f00000-0xf8ffffff]
[ 0.469631] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.469632] bus: 03 index 0 io port: [0xd000-0xdfff]
[ 0.469634] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.469635] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.469636] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.469638] bus: 02 index 0 io port: [0xc000-0xcfff]
[ 0.469639] bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.469640] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.469642] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.469643] bus: 05 index 0 io port: [0xe000-0xefff]
[ 0.469645] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 0.469646] bus: 05 index 2 mmio: [0x88000000-0x880fffff]
[ 0.469647] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.469649] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.469654] NET: Registered protocol family 2
[ 0.484047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.484219] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.484433] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484538] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.484540] TCP reno registered
[ 0.488059] NET: Registered protocol family 1
[ 0.488150] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504003] Switched to high resolution mode on CPU 0
[ 0.703925] it is
[ 0.935056] Freeing initrd memory: 7328k freed
[ 0.935207] cpufreq: No nForce2 chipset.
[ 0.935307] audit: initializing netlink socket (disabled)
[ 0.935323] type=2000 audit(1252837859.932:1): initialized
[ 0.940811] highmem bounce pool size: 64 pages
[ 0.940814] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.941750] VFS: Disk quotas dquot_6.5.1
[ 0.941790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.942215] fuse init (API version 7.10)
[ 0.942277] msgmni has been set to 1698
[ 0.942400] alg: No test for stdrng (krng)
[ 0.942407] io scheduler noop registered
[ 0.942409] io scheduler anticipatory registered
[ 0.942410] io scheduler deadline registered
[ 0.942419] io scheduler cfq registered (default)
[ 0.942543] pci 0000:01:00.0: Boot video device
[ 0.944983] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.945007] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.945023] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.945030] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.945039] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.945071] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.945097] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.945115] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.945123] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.945132] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.945140] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.945181] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.945207] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.945224] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 0.945233] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.945242] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.945252] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.945293] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.945318] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.945336] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 0.945344] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.945353] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.945361] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.945410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.945733] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.945840] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.945842] ACPI: Power Button (FF) [PWRF]
[ 0.945879] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.945881] ACPI: Power Button (CM) [PWRB]
[ 0.946244] ACPI: SSDT 7FF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.946486] processor ACPI_CPU:00: registered as cooling_device0
[ 0.946676] ACPI: SSDT 7FF8E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.946905] processor ACPI_CPU:01: registered as cooling_device1
[ 0.949135] isapnp: Scanning for PnP cards...
[ 1.304705] isapnp: No Plug & Play device found
[ 1.312670] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.312748] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.313063] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.313604] brd: module loaded
[ 1.313821] loop: module loaded
[ 1.313866] Fixed MDIO Bus: probed
[ 1.313870] PPP generic driver version 2.4.2
[ 1.313907] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.313926] Driver 'sd' needs updating - please use bus_type methods
[ 1.313933] Driver 'sr' needs updating - please use bus_type methods
[ 1.313963] ahci 0000:03:00.0: version 3.0
[ 1.313974] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.328031] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.328035] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.328040] ahci 0000:03:00.0: setting latency timer to 64
[ 1.328177] scsi0 : ahci
[ 1.328231] scsi1 : ahci
[ 1.328276] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.328279] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.648022] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.984021] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.000045] ata_piix 0000:00:1f.2: version 2.12
[ 2.000055] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.000058] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.000095] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.000136] scsi2 : ata_piix
[ 2.000179] scsi3 : ata_piix
[ 2.001117] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
[ 2.001121] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
[ 2.796052] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.796062] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.839409] ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 2.839412] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.906063] ata3.00: configured for UDMA/133
[ 3.554617] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 3.554623] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 3.554699] scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 3.554761] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.554773] sd 2:0:0:0: [sda] Write Protect is off
[ 3.554775] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.554793] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.554836] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.554846] sd 2:0:0:0: [sda] Write Protect is off
[ 3.554848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.554865] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.554867] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.596695] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.596721] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.596734] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.596736] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.596765] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.596790] scsi4 : ata_piix
[ 3.596828] scsi5 : ata_piix
[ 3.597671] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 3.597674] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 3.926504] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.254507] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.254774] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 4.254778] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.254800] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 4.254842] scsi6 : pata_jmicron
[ 4.254881] scsi7 : pata_jmicron
[ 4.255417] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 4.255419] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 4.416537] ata7.01: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[ 4.432552] ata7.01: configured for UDMA/33
[ 4.600701] scsi 6:0:1:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
[ 4.603931] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 4.603934] Uniform CD-ROM driver Revision: 3.20
[ 4.604016] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 4.604047] sr 6:0:1:0: Attached scsi generic sg1 type 5
[ 4.604254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.604267] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.604274] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.604277] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.604313] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.608201] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.608206] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.608215] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 4.624007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.624071] usb usb1: configuration #1 chosen from 1 choice
[ 4.624096] hub 1-0:1.0: USB hub found
[ 4.624102] hub 1-0:1.0: 6 ports detected
[ 4.624187] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.624195] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.624197] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.624227] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.628129] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.628134] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.628142] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 4.644007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.644056] usb usb2: configuration #1 chosen from 1 choice
[ 4.644082] hub 2-0:1.0: USB hub found
[ 4.644091] hub 2-0:1.0: 6 ports detected
[ 4.644164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.644176] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.644188] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.644193] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.644195] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.644222] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.644240] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 4.644290] usb usb3: configuration #1 chosen from 1 choice
[ 4.644307] hub 3-0:1.0: USB hub found
[ 4.644311] hub 3-0:1.0: 2 ports detected
[ 4.644367] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.644371] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.644373] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.644406] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.644429] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 4.644477] usb usb4: configuration #1 chosen from 1 choice
[ 4.644494] hub 4-0:1.0: USB hub found
[ 4.644499] hub 4-0:1.0: 2 ports detected
[ 4.644557] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.644561] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.644563] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.644590] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.644608] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 4.644655] usb usb5: configuration #1 chosen from 1 choice
[ 4.644672] hub 5-0:1.0: USB hub found
[ 4.644676] hub 5-0:1.0: 2 ports detected
[ 4.644732] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.644736] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.644738] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.644771] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.644789] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 4.644837] usb usb6: configuration #1 chosen from 1 choice
[ 4.644854] hub 6-0:1.0: USB hub found
[ 4.644859] hub 6-0:1.0: 2 ports detected
[ 4.644913] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.644917] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.644920] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.644949] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.644972] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 4.645018] usb usb7: configuration #1 chosen from 1 choice
[ 4.645035] hub 7-0:1.0: USB hub found
[ 4.645039] hub 7-0:1.0: 2 ports detected
[ 4.645098] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.645102] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.645104] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.645131] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.645149] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 4.645199] usb usb8: configuration #1 chosen from 1 choice
[ 4.645217] hub 8-0:1.0: USB hub found
[ 4.645222] hub 8-0:1.0: 2 ports detected
[ 4.645313] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.645314] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.645788] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.648033] mice: PS/2 mouse device common for all mice
[ 4.648148] rtc_cmos 00:03: RTC can wake from S4
[ 4.648168] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.648188] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.648230] device-mapper: uevent: version 1.0.3
[ 4.648283] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.648328] device-mapper: multipath: version 1.0.5 loaded
[ 4.648330] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.648380] EISA: Probing bus 0 at eisa.0
[ 4.648399] Cannot allocate resource for EISA slot 8
[ 4.648400] EISA: Detected 0 cards.
[ 4.648434] cpuidle: using governor ladder
[ 4.648435] cpuidle: using governor menu
[ 4.648782] TCP cubic registered
[ 4.648848] NET: Registered protocol family 10
[ 4.649144] lo: Disabled Privacy Extensions
[ 4.649372] NET: Registered protocol family 17
[ 4.649386] Bluetooth: L2CAP ver 2.11
[ 4.649387] Bluetooth: L2CAP socket layer initialized
[ 4.649389] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.649390] Bluetooth: SCO socket layer initialized
[ 4.649408] Bluetooth: RFCOMM socket layer initialized
[ 4.649412] Bluetooth: RFCOMM TTY layer initialized
[ 4.649413] Bluetooth: RFCOMM ver 1.10
[ 4.649760] Using IPI No-Shortcut mode
[ 4.649803] registered taskstats version 1
[ 4.649897] Magic number: 9:531:527
[ 4.649936] rtc_cmos 00:03: setting system clock to 2009-09-13 10:31:04 UTC (1252837864)
[ 4.649938] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.649939] EDD information not available.
[ 4.650097] Freeing unused kernel memory: 532k freed
[ 4.650180] Write protecting the kernel text: 4116k
[ 4.650211] Write protecting the kernel read-only data: 1528k
[ 4.821590] sky2 driver version 1.22
[ 4.821621] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.821632] sky2 0000:02:00.0: setting latency timer to 64
[ 4.821663] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[ 4.853912] sky2 0000:02:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
[ 4.853914] Part Number: Yukon 88E8056
[ 4.853915] Engineering Level: Rev. 1.2
[ 4.853916] Manufacturer: Marvell
[ 4.853989] sky2 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 4.856430] sky2 eth0: addr 00:1e:8c:71:7b:fc
[ 4.884668] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.884679] r8169 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.945853] r8169 0000:05:04.0: no PCI Express capability
[ 4.947937] eth1: RTL8169sc/8110sc at 0xf7c72c00, 00:1e:8c:71:74:e4, XID 18000000 IRQ 16
[ 4.969793] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.021914] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.024954] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 5.049889] Floppy drive(s): fd0 is 1.44M
[ 5.068201] FDC 0 is a post-1991 82077
[ 5.204058] usb 1-3: configuration #1 chosen from 1 choice
[ 5.491419] PM: Starting manual resume from disk
[ 5.491422] PM: Resume from partition 8:5
[ 5.491423] PM: Checking hibernation image.
[ 5.491557] PM: Resume from disk failed.
[ 5.532509] kjournald starting. Commit interval 5 seconds
[ 5.532516] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.668011] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 5.852058] usb 7-2: configuration #1 chosen from 1 choice
[ 6.092010] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 6.270218] usb 8-1: configuration #1 chosen from 1 choice
[ 6.300086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000019ca14]
[ 6.512508] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 6.686219] usb 8-2: configuration #1 chosen from 1 choice
[ 10.750357] udev: starting version 141
[ 11.113690] udev: renamed network interface eth1 to eth0
[ 11.148864] udev: renamed network interface eth0_rename to eth1
[ 11.307952] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 11.394353] Linux agpgart interface v0.103
[ 11.415586] cfg80211: Calling CRDA to update world regulatory domain
[ 11.424837] usbcore: registered new interface driver hiddev
[ 11.442414] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[ 11.442635] generic-usb 0003:046D:C50E.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2/input0
[ 11.442646] usbcore: registered new interface driver usbhid
[ 11.442661] usbhid: v2.6:USB HID core driver
[ 11.465819] cfg80211: World regulatory domain updated:
[ 11.465821] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.465823] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.465824] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.465826] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.465828] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.465829] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.549646] iTCO_vendor_support: vendor-support=0
[ 11.693566] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.693708] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 11.693751] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.885589] nvidia: module license 'NVIDIA' taints kernel.
[ 11.908469] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input5
[ 12.139149] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.139156] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.140080] usbcore: registered new interface driver lmpcm_usb
[ 12.140105] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 12.140509] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 12.150700] microsoft 0003:045E:00DB.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input0
[ 12.174299] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input6
[ 12.176036] microsoft 0003:045E:00DB.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input1
[ 12.271067] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.271104] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.340672] phy0: Selected rate control algorithm 'pid'
[ 12.371940] phy0: hwaddr 00:15:af:51:a2:bc, RTL8187vB (default) V1 + rtl8225z2
[ 12.371958] usbcore: registered new interface driver rtl8187
[ 12.788755] lp: driver loaded but no devices found
[ 12.896742] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
[ 13.420044] EXT3 FS on sda6, internal journal
[ 14.151996] kjournald starting. Commit interval 5 seconds
[ 14.152217] EXT3 FS on sda7, internal journal
[ 14.152221] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.365363] type=1505 audit(1252830674.214:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2156
[ 14.396743] type=1505 audit(1252830674.246:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2160
[ 14.396795] type=1505 audit(1252830674.246:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2160
[ 14.396824] type=1505 audit(1252830674.246:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2160
[ 14.396850] type=1505 audit(1252830674.246:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2160
[ 14.483280] type=1505 audit(1252830674.330:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2165
[ 14.483363] type=1505 audit(1252830674.330:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2165
[ 14.501520] type=1505 audit(1252830674.350:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2169
[ 16.524792] tun: Universal TUN/TAP device driver, 1.6
[ 16.524794] tun: (C) 1999-2004 Max Krasnyansky
[ 18.417676] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 18.417678] vboxdrv: Successfully done.
[ 18.417679] vboxdrv: Found 2 processor cores.
[ 18.418290] vboxdrv: fAsync=0 offMin=0x1e0 offMax=0x1028
[ 18.418320] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 18.418321] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 19.875982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.875985] Bluetooth: BNEP filters: protocol multicast
[ 19.898437] Bridge firewalling registered
[ 21.374880] ppdev: user-space parallel port driver
[ 25.150566] r8169: eth0: link down
[ 25.150708] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.154037] sky2 eth1: enabling interface
[ 25.154162] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.837428] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 33.757494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.759555] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 44.452004] eth1: no IPv6 routers present
pastigo@pastigo-desktop:~$
