General Motors > Informatique
Blabla info
mega-stef:
J'utilisais Hubic depuis un moment en accès gratuit.
Avec les nouveaux tarifs, je viens de passer au payant.
10To pour 5€ par mois :D
Ca va donc dupliquer Flickr pour les photos (et tout le reste, nan mais 10To, quoi...)
Ca va mettre un moment à tout uploader, mais bon.
merguez a roulettes:
Bitman:
un brave petit ce G3258, pour un prix ridicule j'ai bien fait de prendre ca :D
en stress test cpu Z
meme pas 50° avec le rad d'origine @3.4ghz :D
et 800mhz quand je glandouille sur le net, easy
merguez a roulettes:
les cpu d'aujourd'hui c'est hallucinant par rapport à il y a quelques années :D
Seb corgan:
--- Citation de: merguez a roulettes le 19/02/16 20:18 ---http://reho.st/preview/i.imgur.com/7ZvDgAs.jpg
http://media.tumblr.com/tumblr_m8dlxp0ZKz1rqrq0b.gif
--- Fin de citation ---
Historiquement on a un peu la même chose, ça s'appelle le "wifil" en interne [:ddr555]
Seb corgan:
RASPBERRY PI 3 OUT !!!!!! :bounce:
--- Citer ---The Raspberry Pi 3 Model B is the third generation Raspberry Pi with a 64-bit 1.2GHz quad-core processor, 1GB of RAM, WiFi (b/g/n), and Bluetooth 4.1!
The latest Raspberry Pi retains the same overall form factor as previous models ensuring compatibility with existing add-on boards (HATs) however some minor changes to the layout and more powerful processor mean we've redesigned our Pibow case.
1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (BCM2837)
1GB RAM (LPDDR2 SDRAM)
On-board Wireless LAN - 2.4 GHz 802.11 b/g/n (BCM43438)
On-board Bluetooth 4.1 + HS Low-energy (BLE) (BCM43438)
4 x USB 2.0 ports
10/100 Ethernet
40 GPIO pins
Full size HDMI 1.3a port
Combined 3.5mm analog audio and composite video jack
Camera interface (CSI)
Display interface (DSI)
microSD slot
VideoCore IV multimedia/3D graphics core @ 400MHz/300MHz
With the ARMv8 processor it can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core, as well as Microsoft Windows 10 IoT edition.
You will need the latest NOOBS image (1.8.0) for the Wireless LAN and Bluetooth drivers to be installed. We sell a pre-imaged NOOBS card on it's own or you will find it included in our Essentials Kits and Complete Starter Kits.
Performance
Compared with the Raspberry Pi 2 the CPU is running at a 33% faster clock rate (1.2GHz vs 0.9GHz) the more modern core also means a more efficient instruction set, especially when performing operations on 64-bit values.
Video and 3D performance has also seen a bump with the VideoCore being clocked at 400MHz for video processing (up from 250MHz) and the 3D graphics processor running at 300MHz (up from 250MHz).
In general use you can expect the Raspberry Pi 3 to perform around 50% quicker than the Raspberry Pi 2 running the same software. In the future as software adds optimisations for the architecture the gap will widen further.
Wireless LAN, Bluetooth, and oh my!
The biggest change is the inclusion of integrated Wireless LAN and Bluetooth 4.1 on board adding two great connectivity options straight out of the box. The Wireless LAN should be compatible with all home network setups and is supported in the latest NOOBs image.
We've achieved speeds of around 40Mbit/sec using the new built in adaptor which is similar to the speeds we see with USB Wi-Fi dongles in the same setup.
Bluetooth will allow you to use a wireless keyboard/trackpad without extra dongles, keeping things nice and tidy.
GPIO and layout
The GPIO header and layout remains the same as before so all of your existing HATs and add-on boards will work fine with the Raspberry Pi 3.
Some cases will not be ideal:
the indicator LEDs have moved (to accommodate the Wireless LAN antenna)
the microSD slot is no longer spring-loaded meaning a little more access space is required
the processor benefits from a little more venting for heat management
some of the smaller components on the board have moved
it's likely that cases made from metal will cause signal issues with the Wireless LAN and Bluetooth.
We've redesigned our Pibow case to provide more venting, a place for installing a heatsink if you really want to push your Pi, and to allow easier access to the microSD slot.
--- Fin de citation ---
Navigation
[#] Page suivante
[*] Page précédente
Utiliser la version classique